The salt fog chamber design allows for cyclic and continuous studies to obtain reliable data on the corrosion resistance of the tested elements. The general principle of operation of the units is the same for all devices, regardless of their size, installed technical characteristics and operating modes.
An ultrasonic type generator is located inside the fog chamber. It ensures uniform distribution of fog droplets throughout the workspace. The heating circuit and the heat-insulating layer ensure maintenance of the set temperature, which significantly speeds up the research process and obtaining results. The microprocessor controller guarantees access to all parameters and functions. The presence of a special touch panel greatly simplifies the control and adjustment of specified characteristics. salt fog camera price is usually high and is constantly changing due to the current situation in the world, so the price can only be found on request.
The brine solution in the chamber is constantly updated. The waste liquid is discharged through a drain hole located at the bottom of the chamber. The new chemical solution is supplied through a pipeline. A NaCl solution is used as the working fluid; acetic acid or copper salts are added to it to speed up the results. The used solution should not be reused as this may distort the test data. When preparing a new solution, it is necessary to check its concentration and pH level.
For safe operation, salt fog chambers are equipped with fuses and automatic circuit breakers. Some models manufactured in Russia and other countries are equipped with additional security modules at the customer’s request.
